Installing Your CopperSmith Lanterns

For Wall Mount gas lanterns, the gas line will come directly out of the bottom at a 90-degree angle straight into the wall.
Pier Mount and Post Fitter lanterns will have a valve that comes straight from the bottom of the lantern into the column or post.
Classic Yoke mount lanterns will have a gas line that runs through the lantern, clipped to the inside of the yoke, and up through the down rod.
The gas line does not come out of the mount or backplate. Please use 1/4″ flexible copper tubing. Always check before roughing in your gas line for installation as position changes with the mount type.
For electric lights and gas lanterns with electronic igniters, the wiring will come out of the backplate indicated on the drawing.
All electronic igniters operate on 120V.
All-electric lanterns will have a black tube that encases the wiring from the bottom of the lantern to the mount or backplate. This does not include any lantern with a Turtle Light Adapter.
The mounting plate for all standard wall-mount lanterns is 5”(H) x 6”(W) x 1“(D).
Flush Mount (direct to the wall without a backplate) lanterns have one hole in the back that will be used to mount.
Do not mount to any flammable or heat-sensitive materials.

Wall Mount Installation Guides

CS Wall.pdf576.4KB

Post Mount Installation Guides

CS Post or Pier.pdf255.2KB

Ceiling Mount Installation Guides

CS Classic Yoke.pdf219.1KB